Sound-devices 722 User Manual download pdf (Page 65)

722 User Guide and Technical Information

# Setup Name Setup Description Setup Options

Line Input 1,2: Gain Control

When inputs 1 and 2 are in LINE input mode, selects

whether the gain setting is controlled by the front

panel knobs or by the menu sensitivity settings below.

• Use front panel knobs

• Use sensitivity settings

Line Input 1: Gain

Line Input 2: Gain

Adjusts the input sensitivity of line-level inputs when

set to Use Sensitivity Settings.

Adjustable from -6 dB to +18 dB in 0.1 dB steps.

Input 1: Delay

Input 2: Delay

Sets a digital delay for each input. Can be used to

compensate for delay in various digital wireless micro-

phone units or digital processors.

0 to 30 milliseconds, 0.1 mS increments

0 mS to 30,000 mS up to 48.048 kHz Fs

0 mS to 15,000 mS up to 96.096 kHz Fs

0 mS to 7,500 mS up to 192 kHz Fs

File: Marker Mode

Enables the user to set cue points on the fly while

recording by pressing the record key.

• Markers disabled

No cue marks are set.

• New Cue

Cue markers will be set within one contiguous

file.

• New File

A new file is started with each press of the record

key, the take counter is increased by one.

File: Max Size

Selects the file size where the 722 will close, then

start a new file. The 722 will not record a file larger

than the selected size.

The largest file permissible with the 722’s FAT32 file

system is 4 GB

• 4 GB CF (3.6 GB)

• 2 GB CF (1.8 GB)

• 1 GB CF (950 MB)

• 512MB CF (450 MB)

File: Folder Options

Allows user to organize files in root and sub-folders. To

not use any folders select <None> on every level.

• TOP-LEVEL

• MID-LEVEL

• BOTTOM-LEVEL

File: View Files

Enters the file directory tree for the selected drive. Highlight media descriptor to navigate the menu

File: View Take List

Allows user to view the last 200 takes. Takes can be

selected and converted to circle takes.

• Circle

File: Copy Files

Allows the user to select a file or a range of files to

be copied from one storage media to another. Files

will only be copied from their current directory to a

directory of the same name on the other media. If a

file will not fit on the destination media, user is given

the option to skip that file and continue with the copy

or abort the copy all together. User is advised at the

end of the copy process how many files were copied

successfully.

• Copy all {drive}  {drive}

• Last 24 hr {drive}  {drive}

• Last 48 hr {drive}  {drive}

• Flagged {drive}  {drive}

All files, when recorded, automatically have their

flag bit set to “on”

File: Copy Flag Reset

Selects whether the flag bit is cleared or not on files

copied from one media to another.

• Disabled

• Enabled

Time Counter: Display

Sets the numbers of the large numerical display. • Big A-time

• Big 24 hour time

Time Counter: Mode

When set to 24 hour, the time counter is displayed

on the main LCD display. The time counter value is

derived from the 722 time of date clock. Recorded files

are stamped in metadata according to that value.

• Off

• 24 hour

Output 1 Left: Source

Output 1 Right: Source

Selects the signal source for the Master Output Bus

(TA3 Outputs and Tape Outputs).

• Input 1

• Input 2

• Track A

• Track B

• Input 1+2

• Track A+B

Output 1 L,R: Attenuation

Selects the attenuation level of signal sent to the

Master Output Bus.

Selectable from 0 to -40 dBFS

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 79 80

Comments to this Manuals

No comments

Sound-devices 722 User Manual Page 65

Comments to this Manuals

Related products and manuals for Audio Sound-devices 722