Sound-devices 722 User Manual download pdf (Page 14)

722 User Guide and Technical Information

v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Right Panel Connectors and Controls

1) AES3id Input

Unbalanced digital input accepts two

channel AES3 (or S/PDIF) on BNC con-

nectors. Supports sample rates up to 200

kHz.

2) FireWire (IEEE-1394) Port

Connection to a computer (Mac OS,

Windows 2k/XP, Vista, Linux) to access

the internal hard drive and Compact-

Flash volumes as mass storage devices.

Also used to attach external FAT32-

formatted FireWire drives to the 722 for

direct recording and copying.

3) C. Link In/Out Ports

RS-232 protocol interface on 6-pin

modular (“RJ-12”) connector for link-

ing multiple 7-Series recorders together.

Word clock and machine transport are

over C. Link.

4) External DC In

Accepts sources of 10–18 volts DC for

unit powering and removable Li-ion

battery charging. The Hirose 4-pin con-

nector is wired pin-1 negative (-), pin-4

positive (+). Pin-2 (-) and pin-3 (+) are

used to charge the removable Li-ion

battery. DC ground at both pins-1 and

2 is at the same potential as chassis and

signal ground.

5) Word Clock Input and Out

Provides clock input and output for the

722. Word input accepts sample rates

between 32 kHz and 192 kHz. Word

clock output is the rate that box is run-

ning. There is no sample rate conversion

utility in the 722.

6) AES3id Output

Unbalanced digital output, two-channel,

for Output Bus 2. Signal source is menu-

selected.

7) Rotary Switch

When in the Setup Menu, the Rotary

Switch moves among menu items; push

to enter a selection or to enter data. In

record and playback modes, rotate to

select headphone monitor source; push

action is user selectable.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Comments to this Manuals

No comments

Sound-devices 722 User Manual Page 14

Comments to this Manuals

Related products and manuals for Audio Sound-devices 722