Sound-devices 722 User Manual download pdf (Page 38)

722 User Guide and Technical Information

v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Scene Name/Number

Scene names are made with alphanumeric characters, including “_ ” and “-” can can be any length

between zero (0) and nine (9) characters in length. Scene numbers are helpful to match audio with

the corresponding scene in a production. Scene names can also be used to identify other items, in-

cluding recording date, artist name, or any other descriptor as required.

Scene names are user-selected in the setup menu and do not change until changed by the user.

To change scene numbers:

1. Enter the user menu and navigate to the Scene Name/Number option.

2. Use the REW (<<) and FF (>>) soft keys to move among characters. Use the PLAY key to delete charac-

ters. Characters are entered from left to right and deleted from right to left.

3. Use the Rotary Switch or the soft key arrows to choose characters. Press the Controller or hit the fast-

forward key to save the character and move to the next position.

4. To save the scene name, press the soft check key or the Controller without selecting a character. After

the ninth character is entered, the scene name is automatically saved.

If all characters are removed, no scene name will be written to ﬁles. If Scene Folder is selected for ﬁle

management, all takes will be placed in the root of the drive.

Take Numbers

Take numbers are integers between 01 and 32000, with or without preceding zeros, which increase

by one each time a new ﬁle is recorded. Take numbers can be set with or without a take separator,

such as the character “-” or “T”. Take numbers can be overridden and a new take number can be set

in the setup menu. If the 722 detects a ﬁle with a duplicate name in the destination folder, a letter

sufﬁx, starting with “A” is added to the ﬁle name, before the extension. Note that take number han-

dling can be selected to reset if set in the setup menu (see File Management and Copying).

To change take numbers:

1. Enter the user menu and navigate to the Take Name/Number option.

2. Use the REW (<) and FF (>) soft keys to move among decimal places and to jump to the single alpha-

numeric take spacer character. Use the PLAY key to reset the take number to 1. Characters are entered

from left to right and deleted from right to left.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 79 80

No comments

Sound-devices 722 User Manual Page 38