Sound-devices 722 User Manual download pdf (Page 13)

722 User Guide and Technical Information

11

Left Panel Connectors and Controls

1

8

7

2

3 4 5 6

1) XLR Input 1/AES3 Input 1&2

Dual function input connection. Input

type set with switch (see #3). Active-bal-

anced analog microphone- or line-level

input for input 1. Transformer-balanced

two-channel AES3 input (1 and 2).

2) XLR Input 2

Same as Input 1 above for analog sig-

nals. Input type set with switch above.

Active-balanced analog microphone- or

line-level input for input 2.

3) Mic-Line-AES3 Input Switch 1

Selects the input level and mode of the

input XLR 1 connector.

4) Mic-Line Input Switch 2

Selects the input level, mic- or line-level

of input XLR 2. NOTE: there are two re-

dundant switch positions for line-level.

5) TA3 Master (L/R) Analog Outputs

Active-balanced, line-level analog L/R

outputs for the Master Analog Out-

puts. Program source and attenuation

level are user selectable. Pin-1 ground,

pin-2 (+), pin-3 (–).

6) Headphone Output

3.5 mm TRS stereo headphone connec-

tor. Can drive headphones from 8 to

1000 ohm impedances to required levels.

Tip left, ring right, sleeve ground.

7) Headphone Volume

Adjusts the headphone volume. NOTE:

the 722 is capable of producing ear-dam-

aging levels in headphones.

8) Tape Output

Unbalanced tape (–10 dBV nominal)

output on 3.5 mm TRS stereo connector.

Signal source is identical to the Master

Output Bus. Tip left, ring right, sleeve

ground.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 79 80

Comments to this Manuals

No comments