Sound-devices 722 User Manual Page 10
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
722 User Guide and Technical Information
8
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
22) Link LED
Indicates that channels 1 and 2 are
linked as a stereo pair. In link mode the
channel 1 potentiometer controls gain,
channel 2 potentiometer controls left-
to-right balance. Inputs can be linked as
either a stereo L/R pair or as a a Mid-
Side (MS) pair.
23) Media Ready LEDs
Indicates storage media is present and
available to record; IN (internal hard
drive), CF (CompactFlash), EX (exter-
nal FireWire drive). Flashing indicates
media problem.
24) Media Activity LEDs
Indicates storage media read/write
activity. IN (internal hard drive), CF
(CompactFlash), EX (external FireWire
drive).
25) High-Pass Filter LEDs
Indicates that the high-pass (low-cut)
filter is active for the input. High-pass
only operates when the input is set to
microphone level.
26) Phantom Power LEDs
Indicates that phantom power (48 volts)
is active for the individual input. Phan-
tom can be applied to microphone or
line-level signals (menu-selected).
27) Microphone Input Limiter LEDs
Illuminates orange when limiting is
occurring on the microphone input. If
constantly lit, the microphone input is
being “hit” with too high of a signal.
Turn down the input sensitivity until
limiting occurs infrequently.
28) Input Signal Presence LEDs
Indicates presence of analog or digital
signal and its relative level on each of
the two inputs.
29) Input Peak (Overload) LED
Indicates analog signal is approaching
clipping (–3 dBFS) on each of the two
inputs. Also used to indicate that an
input is muted.
Panel Lock
Press and hold the backlight key then the tone key to bring up the front panel Button Lock Screen.
Button lock prevents unintentional changing of settings or record status. The 722 displays any but-
ton lock options enabled.
select the soft buttons to
activate the appropriate
button lock mode
There are three modes:
• Unlocked – all buttons are accessible and operate normally.
• Non-Transport Lock – All front panel controls are locked except the Record, Stop, Play, Re-
wind and Fast Forward.
• Lock All – All front panel keys are locked except the Record key. The Record key is kept ac-
tive so the user can initiate recording after entering this mode and enter cue markers. To stop
recording in this mode, you must disengage the panel lock and hit the stop key.
- firmware rev. 2.67 1
- Table of Contents 3
- Welcome 4
- 722 Firmware Known Issues 4
- Copyright Notice and Release 4
- Quick Start Guide 5
- Routing Inputs to Tracks 6
- Recording Parameter Setup 6
- FireWire File Transfer 7
- Front Panel Descriptions 8
- Panel Lock 10
- LCD Display Descriptions 11
- -), pin-4 14
- -) and pin-3 (+) are 14
- Back Panel Descriptions 15
- Input Setup and Control 16
- -6 dBFS 17
- Input Delay 18
- Digital Input – AES3 18
- Input-to-Track Routing 19
- Selective Input Muting 20
- Sampling Rate and Bit Depth 21
- Word Clock 22
- C. Link – Multi-Unit Linking 23
- Outputs – Analog and Digital 24
- Headphone Output 25
- MS Stereo Monitoring 26
- Rotary Switch Behavior 26
- Metering and Display 27
- Meter Ballistics 28
- Peak LEDs 29
- Tone Oscillator 29
- 24-Hour Time Counter 30
- Recording 31
- Pre-Record Buffer 32
- Failure During Recording 32
- Front Panel Lockout 32
- Record Pause 32
- Playback 33
- Audio File Formats 34
- Recording Time Calculation 36
- File Naming / Numbering 37
- Scene Name/Number 38
- Take Numbers 38
- Wave Agent Beta 39
- File Management 40
- File Viewer Navigation 41
- File Viewer Screen 41
- File Time and Date 42
- File Size Maximum 42
- Setting/Clearing Flag Bits 43
- Automatic Flag Clearing 43
- File Deletion 44
- False Take Control 44
- Take Number Incrementing 45
- Take List 45
- Take Status 45
- Formatting 47
- Drive Type 47
- Drive Replacement 48
- Drive Failure 48
- When to Use CF 49
- Testing 49
- Qualified CF Cards 50
- FireWire Bus Powering 51
- Qualified Drives 51
- DVD-RAM Drives 51
- File Transfer – FireWire 52
- Powering 53
- Time of Day Battery 54
- Power-up Messages 55
- Power Consumption Variables 55
- Firmware Upgrades 56
- Connecting the CL-1 57
- Keyboard Assignments 57
- Logic Inputs and Outputs 59
- Setup Menu Presets 60
- User Setups 62
- Setup Menu 63
- • VU only 66
- • Peak only 66
- • Peak-hold only 66
- • Peak+VU 66
- • Peak-hold + VU 66
- Setup Menu Shortcuts 68
- Front Panel Button Shortcuts 69
- Connector Pin Assignments 70
- Specications 71
- Accessories 73
- CE Declaration of Conformity 75
- Software License 76
- Limitation of Liability 77
- Warranty & Service 78
Related products and manuals for Audio Sound-devices 722
Audio Sound-devices 744T User Manual
(90 pages)
(90 pages)
Audio Sound-devices MixPre-D User Manual
(18 pages)
(18 pages)
Audio Sound-devices 302 User Manual
(30 pages)
(30 pages)
Audio Sound-devices 788T User Manual
(180 pages)
(180 pages)
Audio Sound-devices 633 User Manual
(84 pages)
(84 pages)
Audio Sound-devices 552 User Manual
(60 pages)
(60 pages)
© 2020, manymanuals.com. All rights reserved. | 1.402 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals