Sound-devices 302 User Manual download pdf (Page 7)

302 User Guide and Technical Information

7

Output Panel Descriptions

1

2

3

4

7

8

9

5

6

1. XLR Master Outputs

Active-balanced outputs. Pin-1 =

ground; pin-2 = ‘hot’; pin 3 = ‘cold’. Can

be unbalanced by using pin-2 for signal

and pin-1 for ground.

2. Battery Tube

Holds three-AA batteries for internal

powering. Accepts alkaline, lithium, or

NiHM rechargeable cells.

3. Return (Channel 4/5) Level Control

Adjusts the gain of the return feed to

balance program and monitor signals in

headphones.

4. Return (Channel 4/5) Input

Unbalanced stereo 3.5-mm input

connector for return monitor audio. 3.5-

mm wired tip = left, ring = right, sleeve

= ground. Connection used for inputs 4

& 5 when selected in Setup Menu.

5. Mix In

An input to the master bus designed

exclusively to link the Tape Out/ Mix

Out of 302, 442, MixPre, or MP-2 to

the 302 for additional inputs. Pin-1 =

ground, pin-2 = left, pin-3 = right. Shell

of TA3 connector must be grounded to

pin-1 to open connection.

6. Channel 4/5 Activation LED

When illuminated, indicates that the

return connector is now set as input 4

and 5 in the Setup Menu.

7. Output Attenuation LED

When illuminated, indicates that the

XLR output connectors are set for a level

other than the factory default line level.

See Setup Menu to set XLR output levels.

8. Tape Out / Mix Out

Unbalanced stereo output on TA3-type

connector. Same program as master

output. Pin-1 = ground, pin-2 = left, pin-

3 = right. Also used to link to the Mix In

of a 442 or 302.

9. DC Input

Accepts DC voltages from 5–18 VDC for

mixer powering. Hirose 4-pin connector

wired pin-1 negative (–), pin-4 positive

(+). Ext DC is completely isolated

(ﬂoating) from the rest of the circuitry.

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comments to this Manuals

No comments